 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TLP192A TOSHIBA Photocoupler Photorelay TLP192A Telecommunications Measurement and Control Equipment Data Acquisition System Measurement Equipment The Toshiba TLP192A consists of a gallium arsenide infrared emitting diode optically coupled to a photo-MOSFET in a 6-pin SOP package. This photorelay has higher output current rating than phototransistor-type photocoupler; hence, it is suitable for use as On/Off control for high current. * * * * * * * * 6-pin SOP (2.54SOP6): Height = 2.1 mm, pitch = 2.54 mm Normally open (1-form-A) device Peak off-state voltage: 60 V (min) Trigger LED current: 3 mA (max) On-state current: 400 mA (max) On-state resistance: 2 (max) Isolation voltage: 1500 Vrms (min) UL recognized: UL1557, File No.E67349 JEDEC JEITA 11-7C1 Unit: mm Pin Configuration (top view) TOSHIBA Weight: 0.13 g (typ.) 1 6 1: Anode 2: Cathode 4: Drain D1 5: Source 6: Drain D2 2 5 3 4 Schematic 1 6 2 5 4 1 2002-04-25 TLP192A Maximum Rating (Ta = 25C) Characteristics Forward current Forward current derating (Ta > 25C) = LED Peak forward current (100 ms pulse, 100 pps) Reverse voltage Junction temperature Off-state output terminal voltage A connection On-state current Detector B connection C connection A connection Forward current B connection derating (Ta > 25C) C connection = Junction temperature Storage temperature Operating temperature Lead soldering temperature (10 s) Isolation voltage (AC, 1 min, R.H. < 60%) = ION Symbol IF DIF/C IFP VR Tj VOFF Rating 50 -0.5 1 5 125 60 400 400 800 -4.0 DION/C -4.0 -8.0 Tj Tstg Topr Tsol BVS 125 -55 to 125 -40 to 85 260 1500 C C C C Vrms mA/C mA Unit mA mA/C A V C V (Note 1) Note 1: LED pins are shorted together. Detector pins are also shorted together. Recommended Operating Conditions Characteristics Supply voltage Forward current On-state current Operating temperature Symbol VDD IF ION Topr Min 3/4 5 3/4 -20 Typ. 3/4 7.5 3/4 3/4 Max 48 25 400 65 Unit V mA mA C Circuit Connections 1 2 3 6 5 4 LOAD AC or DC 1 2 3 6 5 4 LOAD 1 2 3 6 5 4 LOAD DC DC A connection B connection C connection 2 2002-04-25 TLP192A Electrical Characteristics (Ta = 25C) Characteristics Forward voltage LED Reverse voltage Capacitance Detector Off-state current Capacitance Symbol VF IR CT IOFF COFF Test Condition IF = 10 mA VR = 5 V V = 0, f = 1 MHz VOFF = 60 V V = 0, f = 1 MHz Min 1.0 3/4 3/4 3/4 3/4 Typ. 1.15 3/4 30 3/4 130 Max 1.3 10 3/4 1 3/4 Unit V mA pF mA pF Coupled Electrical Characteristics (Ta = 25C) Characteristics Trigger LED current Return LED current A connection On-state resistance B connection C connection RON Symbol IFT IFC Test Condition ION = 400 mA IOFF = 100 mA ION = 400 mA, IF= 5 mA ION = 400 mA, IF= 5 mA ION = 800 mA, IF= 5 mA Min 3/4 0.1 3/4 3/4 3/4 Typ. 1.6 3/4 1 0.5 0.25 Max 3 3/4 2 1 3/4 W Unit mA mA Isolation Characteristics (Ta = 25C) Characteristics Capacitance input to output Isolation resistance Symbol CS RS Test Condition VS = 0 V, f = 1 MHz VS = 500 V, R.H. < 60% = AC, 1 min Isolation voltage BVS AC, 1 s, in oil DC, 1 min, in oil Min 3/4 5 10 10 Typ. 0.8 10 14 Max 3/4 3/4 3/4 3/4 3/4 Unit pF W Vrms Vdc 1500 3/4 3/4 3/4 3000 3000 Switching Characteristics (Ta = 25C) Characteristics Turn-on time Turn-off time Symbol tON tOFF Test Condition RL = 200 W VDD = 20 V, IF = 5 mA (Note 2) Min 3/4 3/4 Typ. 0.8 0.1 Max 2 0.5 Unit ms Note 2: Switching time test circuit IF VDD IF VOUT 4 VOUT 10% tON 90% tOFF 1 2 6 RL 3 2002-04-25 TLP192A IF - Ta 100 1200 ION - Ta (mA) IF (mA) 80 1000 C connection Allowable forward current 60 ION On-sate current 800 600 A and B connections 40 400 20 200 0 -20 0 20 40 60 80 100 120 0 -20 0 20 40 60 80 100 120 Ambient temperature Ta (C) Ambient temperature Ta (C) IF - VF 100 Ta = 25C 600 Ta = 25C A connection IF = 5 mA ION - VON (mA) On-state current ION 10 (mA) 30 400 Forward current IF 200 3 0 1 -200 0.3 -400 0.1 0.6 0.8 1 1.2 1.4 1.6 1.8 -600 -0.6 -0.4 -0.2 0 0.2 0.4 0.6 Forward voltage VF (V) On-state voltage VON (V) RON - Ta 5 ION = 400 mA 4 IF = 5 mA A connection 5 ION = 400 mA t<1s A connection IFT - Ta (mA) (W) 4 RON 2 Trigger LED Current 3 IFT 3 2 1 1 0 -20 0 -20 On-state resistance 0 20 40 60 80 100 0 20 40 60 80 100 Ambient temperature Ta (C) Ambient temperature Ta (C) 4 2002-04-25 TLP192A tON, tOFF - IF 5000 3000 Ta = 25C VDD = 20 V RL = 200 W 1000 500 300 tOFF 100 50 30 1 3 5 10 30 tON 50 100 300 10 -20 0 tON, tOFF - Ta tON 1000 (ms) 3000 tON, tOFF tON, tOFF (ms) 300 tOFF 100 Switching time Switching time 30 VDD = 20 V RL = 200 W IF = 5 mA 20 40 80 80 100 Input current IF (mA) Ambient temperature Ta (C) IOFF - Ta 30 VOFF = 60 V (nA) Off-state current IOFF 10 3 1 0.3 0.1 -20 0 20 40 80 80 100 Ambient temperature Ta (C) 5 2002-04-25 TLP192A RESTRICTIONS ON PRODUCT USE 000707EAC * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with domestic garbage. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. * The information contained herein is subject to change without notice. 6 2002-04-25 |
Price & Availability of TLP192A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |